Average Rosin Yields from Various Cannabis Material


Viviane Schute
Cannabis enthusiast and student of the art of solventless extraction
✅ Updated 10/19/21
How much rosin should you get? It depends mostly on your starting material. More trichomes mean more yield, so bubble hash out-yields kief or dry sift, which out-yields flower. Use the benchmarks below to gauge your presses, then run your own numbers in our free Rosin Yield Calculator.
Table of Contents
| Starting material | Typical rosin yield |
|---|---|
| Flower | 15-25% |
| Kief or Dry Sift | 30-40% |
| Bubble Hash | 60-70+% |
These ranges are rough benchmarks, and there will always be outliers.
Rosin Yield, Press Temperature, and Bag Micron by Material
| Typical rosin yield | Starting plate temp | Time after preheat | Bag micron | |
|---|---|---|---|---|
| Flower | 15–25% | 180–220°F (often 200–210°F) | 90–120 seconds | 90–160µ |
| Kief or dry sift | 30–40% | 150–190°F | 60–90 seconds | 25–50µ |
| Bubble hash | 60–70%+ | 150–190°F (fresh-frozen hash at the cooler end) | 60–90 seconds | 15–37µ |
Yield ranges are the benchmarks in this article. Temperatures, times, and microns are starting points from our Hash Rosin Press Temperature and Time Chart; results vary by cultivar and quality.
Worked Example: What 7 Grams Can Return
| Yield range | Rosin from 7 g | |
|---|---|---|
| Flower | 15–25% | About 1.1–1.8 g |
| Kief or dry sift | 30–40% | About 2.1–2.8 g |
| Bubble hash | 60–70%+ | About 4.2–4.9 g or more |
Simple math on the benchmark ranges above (rosin weight ÷ starting weight × 100), not a guarantee.
How to Improve Your Rosin Yield
- Start with better material. More trichomes per gram means more rosin, and quality in sets the ceiling for quality out.
- Check flower moisture. Overly dry flower yields poorly; aim for about 60–65% RH, and rehydrate dry buds gently with terracotta hydro stones if needed.
- Match the bag to the material. Use a tight micron for hash and a more open one for flower, and pack an even puck with a pre-press mold so it heats evenly in your rosin bags.
- Preheat and ramp pressure. A short preheat and gradually increasing pressure help resin flow instead of blowing out the bag.
- Dial in temperature. Hotter presses can raise yield but cost terpenes, so stay inside the ranges above. A press with accurate plates, like our Easy-Drip rosin press, makes results repeatable.
What Affects Rosin Yield?
No matter what cannabis material you’re using to press rosin, the quality of the cannabis you start with determines the quality of rosin you end with. The number one most important ingredient to achieving premium quality rosin with top yields is exceptional source material.
Assuming you start with quality cannabis, the variables of time, temperature, and pressure are adjusted to deliver the highest levels of purity, potency and yield. So what rate of returns should you be looking for when pressing rosin?
The answer depends on which type of cannabis source material you’re using. All other variables remaining constant, bubble hash will yield more than kief or dry sift, which yields more than flower.
Higher percentages of trichomes to plant matter in the starting material equates to higher percentages of rosin yield.
More trichomes mean more yield. Bubble hash contains a much higher percentage of trichomes to plant material than cannabis flowers, and therefore the rosin yields from bubble hash are vastly higher than yields from flowers.
However, just because flower doesn’t yield as much as bubble hash doesn’t mean it’s not worth pressing. Yield isn’t everything, and quality rosin can be squished from properly dried and high quality flower.
Does Strain Affect Rosin Yield?
Strain, or cultivar, is another important factor to consider when discussing rosin yields. Some strains will naturally squish better than others. If your material is fresh and properly dried and you’re using the right time, temperature and pressure but still not producing satisfactory yields, the limiting factor might be the cannabis strain. Check out this article to see which strains are best for pressing rosin.
How to Benchmark and Calculate Your Yield
All that considered, the following is a rough guide to help you benchmark your current rosin yields relative to the type of starting material you use:
Flower: 15-25%
Kief or Dry Sift: 30-40%
Bubble Hash: 60-70+%
To easily calculate your yields for rosin and bubble hash production, check out The Press Club Automatic Yield Calculator.
These ranges are good for reference but there will always be outliers. Use these percentages to benchmark your progress as you work to improve not only the quality but also the yield percentages you can achieve.
Yield definitely isn’t everything, but it is an important consideration when deciding how to allocate premium cannabis starting material. What’s your favorite material to squish, and what are your yields? Let us know in the comments!
Thoughts? Let us know by joining our secret Facebook group. Hang out with a community of like-minded solventless heads like yourself. Ask our head extractor questions, share your latest press and learn from hobbyists and experts in the industry.
FREQUENTLY ASKED QUESTIONS
What kind of material gives the highest percentage of return for rosin?
Bubble hash gives the highest rates of return for rosin in the range of 60-70% and up.
What kind of material gives the lowest percentage of return for rosin?
Flower offers the lowest rate of return at 15-25% yield on rosin.
How can you improve rosin yield?
Using the highest quality starting material, double checking moisture content to ensure flower is not too dry, pre heating the material, and increasing pressure gradually during extraction are all ways to improve rosin yield.
How do you calculate rosin yield percentage?
Divide the weight of rosin you collected by the weight of the material you pressed, then multiply by 100. For example, 10 g pressed into 2 g of rosin is a 20% yield. Our Rosin Yield Calculator does the math for you.
Why don't I have a good yield on rosin?
If you've double checked all inputs and extraction settings for quality and accuracy and you're still not getting good yields, the specific cultivar you're pressing may be the reason. Not all cultivars produce high yields for rosin.
Is yield the most important thing for rosin?
While yield is definitely a priority, the most important thing for us is quality. We are always aiming to produce the highest quality, not necessarily the highest rates of return possible. However, starting with a quality material normally makes both objectives possible at the same time.
Does press temperature affect rosin yield?
Yes. Higher temperatures can increase yield, but above about 210°F for flower you may notice fewer terpenes and less flavor. Hash and dry sift press much cooler, usually around 150–190°F.
What micron rosin bag gives the best yield?
Match the micron to the material rather than chasing one size: 15–37µ is typical for bubble hash, 25–50µ for dry sift, and 90–160µ for flower. Overpacking a tight bag can choke yield.

Leave a comment
Please note, comments must be approved before they are published