How to Make Vape Cartridges with Your Rosin


Todde Philips
🇺🇸 Retired veteran, father, rock-climbing expert & rosin connoisseur
✅ Updated 6/21/21
You can’t put dabbable rosin straight into a vape cartridge; it is too thick and uneven. First thin it into a runny, uniform oil using one of three methods: warm it and mix in a few drops of terpenes (our preferred, closest-to-solventless option), blend it with a store-bought wax liquidizer (usually PG or VG), or winterize it with food-grade alcohol to remove fats and waxes. Then fill a 510-thread cartridge with a blunt-tip syringe, without overfilling it.
Table of Contents
Vape cartridges are known to be one of the easiest ways to enjoy cannabis. Their convenience, cleanliness, discreetness, potency, and flavor combine for a truly unique and satisfying experience. It’s no surprise that vape cartridges are one of the highest-selling product categories at dispensaries. But what if you could make your own rosin vape cartridges at home?
Dabbable rosin is too thick for a cartridge, so it has to be made runny and uniform first. Below we cover the three common methods and explain why we prefer keeping carts as close to solventless as possible. Want a fully solventless method? Read Step By Step 100% Solventless Vape Cartridges.
Making your own cannabis vape cartridges from rosin provides a great alternative to the traditional dabbing experience and gives you the added convenience of quickly enjoying your rosin on the go. And it turns out that making your own vape carts with rosin isn’t very difficult or complicated!
But it’s not as simple as just throwing your rosin into an empty vape cart either...
Rosin in it’s dabbable form isn’t ideal for a vape cartridge. The cannabis within a vape pen cartridge should be a runny and oily consistency, allowing for consistent and thorough exposure to the heat source. Furthermore, the liquid within a vape cartridge needs to be homogenous, free of any suspended solids or inconsistent textures throughout.
To vaporize rosin from a cartridge, we need to make the rosin runny and less viscous than the commonly enjoyed badder, jam, or sappy consistencies.
There are three ways to accomplish this transformation: applying heat and adding terpenes to the rosin, mixing the rosin with a pre-made wax liquidizer product, or winterizing the rosin. Each method addresses the problem of viscosity when using rosin for vape cartridges. Let's discuss these approaches and also how exactly to fill vape cartridges without creating a huge mess and potentially wasting your valuable rosin.
Three Ways to Thin Rosin for Carts, Compared
| Heat + terpenes | Wax liquidizer | Winterizing | |
|---|---|---|---|
| What you add | A few drops of terpenes, with gentle heat | A pre-made liquidizer, often containing PG and/or VG | Food-grade alcohol, which is evaporated off afterward |
| Starting point | About 2–3 drops of terpenes per gram, adjusted to taste and texture | Follow the maker’s ratio (for example, 2 ml per gram) | About 10:1 alcohol to rosin, frozen, then filtered |
| Effort | Low, but needs some experimenting | Lowest; most forgiving | Highest; takes overnight plus filtering and purging |
| Main trade-off | Ratio varies by rosin; high-lipid rosin may still be too thick | Long-term safety of inhaling vaporized PG/VG is uncertain | Not solventless during processing; requires careful purging |
| Our take | Preferred method | Convenient, but we don’t put it in our carts | Useful when lipids keep rosin too thick |
Ratios and steps are the ones described in this guide; every rosin behaves a little differently.
Method 1: Using Heat and Terpenes
Introducing terpenes to rosin is a great way to reduce the viscosity and create the consistency we need to use rosin in vape cartridges. Ideally your rosin will have a high terpene content to start, but adding just a few drops of pure terpenes can transform the rosin into the liquid form perfect for vaping.
Start with just one gram of rosin at the bottom of a glass jar. Use a dropper to add 2-3 drops of terpenes and use a dabber tool to mix the rosin and the terpenes together. You can use a heating pad set to around 90 degrees to slightly heat the rosin before you begin mixing in the terpenes, which is sometimes helpful in combining the two together.
The exact ratio of added terpenes to rosin depends on the rosin itself and some experimentation is necessary. It’s best to start with one gram at a time until you find the magic formula.
Several online retailers ship pure terpenes which do not contain any cannabis and are the perfect solution to your rosin vape cartridge needs. You can purchase a pre-made combination of various terpenes or individual terpenes by themselves. Start with a couple different bottles to test your flavor preference.
One great advantage of using heat and using terpenes to make your rosin vape juice is that terpenes are already produced naturally by the cannabis plant and exist in the rosin. Terpenes are not foreign to cannabis and they can be safely vaporized and inhaled from a vape cartridge. They also contribute to the unique flavor profile of your particular rosin.
Read the complete guide to making vape carts without any chemical additives or solvents in our article Step By Step 100% Solventless Vape Cartridges.
Method 2: Using Wax Liquidizers
Pre-made wax liquidizer mixtures are another solution to preparing rosin for vape carts. These convenient formulas help remove some of the guesswork from the process by prescribing exact ratios when mixing rosin with the liquidizer. For example, the manufacturer will indicate that 2 ml of liquidizer mixed with one gram of rosin will produce the desired consistency. Although this will sometimes take a bit of adjustment, these liquidizers can allow for a larger margin of error than terpenes alone.
Some people prefer the clear direction and ease of use with pre made liquidizers, but it doesn’t come without cost. These cannabis concentrate liquidizers often contain Propylene Glycol (PG) and or Vegetable Glycerin (VG), both of which are questionable when vaporized. The FDA recognizes these substances as generally safe, and they’re found in many consumables that we enjoy daily. However, the long-term impact of vaporizing and inhaling these substances is questionable.
As a general rule, the less foreign material we introduce to our cannabis products, the better. That said, wax liquidizers can provide the quick and easy solution to turning your rosin into a vapable liquid.
Method 3: Winterizing Rosin
The process of separating unwanted fats, lipids, and waxes from rosin using food-grade alcohol is known as rosin winterization. We can transform rosin into the consistency needed for a vape cartridge by eliminating these excess fatty compounds.
Although this process is in contrast to the solventless approach used in extracting rosin, the alcohol itself can be completely evaporated at the end. The alcohol leaves no trace.
To winterize rosin, we first mix our rosin with food-grade alcohol, freeze it, then clean the rosin using a syringe and filter. Using a shot glass or small beaker and Everclear is perfect for the in-home setup.
Mix the Everclear and rosin in a 10:1 ratio of alcohol to rosin and place on a heating pad set to low heat.
We want just enough heat to help the alcohol and rosin to mix together thoroughly. Stir them together with a dab tool and within minutes you’ll see the fats and waxes start to separate.
Once they’re fully separated, place the mixture in the freezer for 14 hours, after which the fatty compounds will settle to the bottom of the glass. Use a syringe to remove the liquid rosin on top.
Then, place a .22 micron syringe filter at the end of the syringe and push the rosin through the filter and into another glass. Additional refinement can be achieved at this point by placing the mixture on a low heat source for a couple of hours and stirring regularly.
One additional step to purity involves placing a larger glass beaker or jar over the rosin, to act like a glass dome over the mixture. Placed over temps around 200 degrees fahrenheit, after two hours the rosin will be in its purest form. Only through the use of a vacuum can you achieve a higher level of refinement after winterization.
How to Fill a Vape Cartridge with Rosin
Once you’ve successfully transformed the solid rosin into a runny oil it’s time to fill the empty vape cartridges. 510-threaded half and full-gram CCELL cartridges work best and are easy to find online. You’ll also need a blunt tip needle and syringe.
First, unscrew the mouthpiece from the glass portion of the cartridge.
It may help to place the liquid rosin back on a heating pad at a low setting to briefly reduce viscosity for an easier filling process. This is an optional step that can be helpful, but the rosin should already be the correct viscosity for the vape cartridge before it gets any heat treatments.
Use the syringe and needle to collect enough rosin to fill a cartridge. Insert the needle into the cartridge and push down on the plunger to fill the cartridge. Don’t overfill the cartridge.
Once the cartridge is filled, remember there will be some rosin oil left in the needle!
Replace the top portion of the cartridge and firmly screw it into place. Screw the cartridge into your vape pen and start with the lowest setting. Work your way up to higher settings only as needed.
Cart-Filling Checklist
| What you need | Why | |
|---|---|---|
| Thinned rosin oil | It must already flow before filling; a heating pad on low only helps briefly | |
| 510-thread CCELL-style cartridges | Half- and full-gram sizes are common and fit most batteries | |
| Blunt-tip needle and syringe | Fills without a mess and without overfilling | |
| Glass dab tool | Mixing terpenes into rosin and handling small amounts cleanly |
Start your battery at the lowest setting and work up only as needed.
Which Method Is Best?
So which approach is better? As solventless enthusiasts we’re definitely biased toward the cleaner and less adulterated approach to using rosin to make your own vape cartridges. Introducing terpenes specifically derived from real cannabis to hash rosin is our preferred method of using rosin to make vape carts.
We’re more confident in the safety of vaporized terpenes than we are of vaporized Propylene Glycol or Vegetable Glycerin.
That said, the success of turning your hash rosin into a form that is suitable for the vape pen is dependent on many variables including cultivar. With the high lipid content in rosin, it can be very difficult to produce vape pen carts without winterizing the product.
We also recognize there is a demand for wax liquidizers and they do offer value to people looking to make their own vape carts. But we don't put this into our carts.
How do you make your own rosin vape cartridges? Let us know in the comments!
Thoughts? Let us know by joining our secret Facebook group. Hang out with a community of like-minded solventless heads like yourself. Ask our head extractor questions, share your latest press and learn from hobbyists and experts in the industry.
FREQUENTLY ASKED QUESTIONS
What is PG?
PG stands for propylene glycol, which is a viscous, colorless alcohol, which is nearly odorless but possesses a faintly sweet taste. PG is sometimes used in the production of vape carts, to the detriment of consumers' health.
What is Everclear?
Everclear is a high-potency brand of grain alcohol that can be used as a solvent for winterizing rosin.
What is an atomizer?
An atomizer is the component of a vape pen that comes into contact with the oil. The atomizer is heated and converts the cannabis oil into vapor.
What does 510-threaded mean?
510 refers to the type of connection for vape thread batteries. Most vape carts and batteries are 510-threaded, which means that they are compatible and can fit together.
What are CCELL cartridges?
The most common type of vaping cartridge, CCELL cartridges contain ceramic heating elements and a series of tiny inlet holes that make vaporization and inhalation possible.
Can you put rosin directly into a vape cartridge?
Not as is. Dabbable rosin is too thick and not uniform enough for a cartridge, so it needs to be thinned with heat and terpenes, a liquidizer, or winterization first.
How many terpenes do you add to rosin for a cart?
Start with about 2–3 drops of terpenes per gram of rosin, mix with gentle heat, and adjust. Work one gram at a time until you find the right ratio for that rosin.
What alcohol ratio is used to winterize rosin?
This guide uses about 10 parts food-grade alcohol, such as Everclear, to 1 part rosin, then freezes the mixture, pulls off the liquid, and pushes it through a 0.22 micron syringe filter.
Is a rosin vape cart solventless?
It can be if you only use heat and cannabis-derived terpenes. Winterizing uses alcohol during processing, and liquidizers add PG or VG. For a fully solventless approach, follow our step-by-step guide linked above.




11 comments
Adding terps will give it a harsh hit.
Winterizing defeats the entire purpose of solventless cannabis consumption. If you are fine with evaporating alcohol then you should be fine with any of the cheaper cartridges off the shelf.
PG and VG scare me because of the vape deaths.
any other recommendation for rosin cartridges?